Free worldwide shipping over $120 · Made to order in solid oak & walnut
eversline.com

Wood Care Guide

Looking After Solid Wood

Wood is a living material. It moves a little with the seasons, it darkens with light, and it takes on a patina that plastic never will. Here’s how to keep it looking its best.

Everyday care

  • Wipe with a soft, dry or slightly damp cloth, following the grain
  • Blot spills straight away rather than letting them sit
  • Skip household sprays, bleach, alcohol wipes and “polish”
  • Never put a wooden piece in the dishwasher or leave it soaking

Where to keep it

  • Avoid direct, all-day sunlight — it bleaches one side unevenly
  • Keep away from radiators, heat vents and cold windowsills
  • Very dry winter air can cause slight movement — a humidifier helps

Marks and scratches

Light scratches usually disappear with a gentle sand along the grain and a fresh coat of oil. Water rings often fade on their own. Deeper dents can sometimes be steamed out with a damp cloth and a warm iron, then re-oiled.

Colour changes

Oak lightens slightly and walnut warms and mellows over the first year or two. This is normal and permanent — most people prefer the older colour.


Re-oiling

An oil finish is meant to be renewed, not replaced. When the surface starts to look dry or pale, re-oil it — roughly every 6 to 12 months for pieces you handle daily, less often for shelves and stands.

  1. Clean the surface and let it dry completely.
  2. If it feels rough, sand very lightly with 320-grit paper, along the grain.
  3. Apply a thin coat of food-safe hardwood oil with a lint-free cloth.
  4. Leave it 15–20 minutes, then wipe off everything that hasn’t soaked in.
  5. Let it cure for a few hours before putting anything back on it.

Safety note: oily rags can self-heat. Lay them flat to dry outdoors or soak them in water before you throw them away — don’t leave them screwed up in a bin.


Still unsure about something? Ask us — we would rather answer than see a piece treated with the wrong product.